Commercial electrical

Commercial electricians for Melbourne cafés and restaurants

Power out to the coffee machine, a safety switch that won't stay on, or half the kitchen gone dark? Report it and Task-Us matches your venue with a vetted, licensed electrician, who replies with an ETA and a quote.

What we cover

A commercial kitchen draws a lot of power from a lot of equipment at once. When something trips or fails, service usually stops with it. We match venues with electricians for:

  • Safety switches (RCDs) and circuit breakers that keep tripping
  • Power loss to part of the kitchen, bar or dining room
  • Power points, isolators and hard-wired connections for ovens, fryers and coffee machines
  • Three-phase supply faults
  • Switchboard faults, and upgrades when you add new equipment
  • Kitchen, dining room and exit lighting
  • Wiring for exhaust canopy fans

Signs you need an electrician

  • A safety switch or breaker that trips again after you reset it
  • Lights flickering or dimming when big equipment starts up
  • Power points or plugs that are warm, discoloured or crackling
  • A burning or hot-plastic smell near the switchboard or an appliance
  • Equipment that only works on some circuits

Safety first: if you smell burning, see scorch marks, or a switch won't stay on, stop using that equipment. If it's safe to, switch the circuit off at the switchboard, and don't keep resetting a tripping switch. If anyone gets a shock, or there's smoke or fire, call 000 first.

Licensing and certificates

In Victoria, electrical work must be done by a licensed electrician, and Energy Safe Victoria requires a Certificate of Electrical Safety for electrical installation work. Ask your electrician for a copy and keep it with your venue's records.

How it works

  1. Scan the Task-Us QR code in your venue, or use the report page, and describe the fault. A photo helps.
  2. An electrician from our bench replies by text with an ETA and a quote.
  3. Tap accept, and they come out to do the job.

Common issues across metropolitan Melbourne

  • Safety switches tripping during storms and wet weather
  • Power lost to a kitchen circuit or a key piece of equipment
  • Overloaded circuits in older shopfronts and heritage buildings
  • Lighting failures in the dining room or kitchen

Other trades

Common questions

Why does our safety switch keep tripping?

The usual causes are a faulty appliance, moisture getting into a power point or light fitting, or too much load on one circuit. Unplugging equipment one item at a time can show whether an appliance is to blame. If it keeps tripping, leave it off and report it.

Will I get a Certificate of Electrical Safety?

Energy Safe Victoria requires a Certificate of Electrical Safety for electrical installation work. Ask the electrician for your copy when the job is finished.

We're adding new equipment. Can our switchboard handle it?

Include the equipment's power requirements in your report, such as 15 amp or three-phase, from the spec sheet. The electrician can then check your switchboard's capacity and quote properly.

Can the work happen outside trading hours?

Say in your report when the electrician can get access. Work that needs the power off is often easier to do before or after service.

Will I know the cost before work starts?

Yes. You see a quote alongside the ETA, and nothing goes ahead until you tap accept.

Something broken right now?